Tools and Equipment
for Glass blowing and Beadmaking

Mandrels
For making glass beads. Tired of bent mandrels? Our Mandrels are better and are specially made to resist bending. Compare, take one of our mandrels and a competitors. Bend them together until the competitors stay bent while ours returns straight. Made with high temperature metal that has low heat transfer, keeping your fingers cool while the end is red hot. Make a glass bead with a hole by wrapping molten glass around these rods. Remember putting almost anything in a 4000 degree flame for a few seconds will melt this and almost any metal. You never need to put a flame directly on the bare mandrel.
Made in the USA


Mandrel Picture



Diameter Mandrel:
3/64" - .045 - 1.1 mm
1 Doz. - $6.00
Diameter Mandrel:
3/64" - .045 - 1.1 mm
1 Pound - $32.00
Diameter Mandrel:
1/16" - .062 - 1.6 mm
1 Dozen - $7.00
Diameter Mandrel:
1/16" - .062 - 1.6 mm
2 Pounds - $46.00
Diameter Mandrel:
5/64" - .080 - 2 mm
1 Dozen -$8.00
Diameter Mandrel:
5/64" - .080 - 2 mm
2 Pound -$40.00
Diameter Mandrel:
3/32" - .092 - 2.3 mm
1 Dozen -$9.00
Diameter Mandrel:
3/32" - .092 - 2.3 mm
2 Pound -$40.00
Diameter Mandrel:
 1/8" - .125 - 3.2 mm
1 Dozen -$10
Diameter Mandrel:
1/8" - .125 - 3.2 mm
2 Pound -$40.00
Diameter Mandrel:
5/32 - .156 - 4 mm
1 Dozen -$15
Diameter Mandrel:
5/32 - .156 - 4 mm
2 Pound -$40.00
Diameter Mandrel:
3/16" - .187 - 4.75 mm
1 Dozen -$20


Divider
Ring Mandrel
Stainless Steel Ring Mandrel makes forming glass a breeze. Hold them in your hand or purchase the holder separately and mount on your work table. Graduated mandrels allow making different sized rings.
DO NOT PLACE MANDREL IN FLAME - Wrap hot glass around mandrel and quickly remove.


Ring Mandrel
Ring Mandrel 12" Long $22


Ring Mandrel Holder
This device is made to hold the ring mandrel and can be clamped to your table to keep both hands free while forming your glass rings. Adjustable to different angles. We recommend using at least one C clamp to mount to table, for safety and stability.

Ring Mandrel Holder

Ring Mandrel Holder $9
C Clamp $4

Divider
Bracelet Mandrels
Stainless Steel Bracelet Mandrel makes forming glass a breeze. Hold in your hand or place in a vice mounted on your work table. Graduated mandrels allow making different sized bracelets. Available in round or Oval.
DO NOT PLACE MANDREL IN FLAME - Wrap hot glass around mandrel and quickly remove.


Bracelet Mandrel

Oval Bracelet Mandrel
12" long
Tapers from 1-1/2" by 1-1/4" to 2-1/8" by 2-1/2" oval
$36
Oval Bracelet Mandrel
15 inches long
Tapers from 1 ½' to 3"
$37
Round Bracelet Mandrel
12" Long
Tapers from 1-1/2" to 2-2/4"
$29

Divider